ChemBK
  • Home
  • Product Category


PALLADIUM CHLORIDE(II)

Palladium(II) chloride

CAS: 7647-10-1

Molecular Formula: Cl2Pd

  1. Home
  2. Product Category
  3. Inorganic chemical engineering
  4. inorganic salt
  5. PALLADIUM CHLORIDE(II)

PALLADIUM CHLORIDE(II) - Names and Identifiers

Name Palladium(II) chloride
Synonyms nci-c60184
Palladium chloride
PALLADIUM CHLORIDE
enplateactivator440
PALLADIUM DICHLORIDE
palladium dichloride
PALLADIUM(+2)CHLORIDE
PalladiumchloridecaPd
PALLADIUM(II) CHLORIDE
PALLADIUM CHLORIDE(II)
Palladium(II) chloride
palladiumchloride(pdcl2)
palladium(2+) dichloride
Palladium(II) chloride solution
palladium(ii) chloride anhydrous
CAS 7647-10-1
EINECS 231-596-2
InChI InChI=1/2ClH.2H2O.Pd/h2*1H;2*1H2;/q;;;;+2/p-2

PALLADIUM CHLORIDE(II) - Physico-chemical Properties

Molecular FormulaCl2Pd
Molar Mass177.33
Density4g/mLat 25°C(lit.)
Melting Point678-680°C(lit.)
Boling Point100°C at 760 mmHg
Water SolubilityInsoluble
Solubility 55.6g/l insoluble
Vapor Presure0Pa at 20℃
AppearancePowder/Solid
Specific Gravity4
ColorYellow
OdorOdorless
Merck14,6990
PH2.15 (30g/l, H2O, 20℃)
Storage ConditionStore below +30°C.
StabilityStable. Incompatible with strong oxidizing agents.
Physical and Chemical PropertiesThe trait product was brown crystal.
soluble in water. Soluble in hydrochloric acid, ethanol, acetone, hydrobromic acid.
UseMainly used in the manufacture of special products catalyst, molecular sieve, preparation of non-conductor material coating with surface activator, the production of gas sensitive components

PALLADIUM CHLORIDE(II) - Risk and Safety

Risk CodesR34 - Causes burns
R43 - May cause sensitization by skin contact
R40 - Limited evidence of a carcinogenic effect
R28 - Very Toxic if swallowed
R41 - Risk of serious damage to eyes
R37/38 - Irritating to respiratory system and skin.
R25 - Toxic if swallowed
R22 - Harmful if swallowed
Safety DescriptionS26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
S37/39 - Wear suitable gloves and eye/face protection
S28 - After contact with skin, wash immediately with plenty of soap-suds.
S27 - Take off immediately all contaminated clothing.
S36/37 - Wear suitable protective clothing and gloves.
S27/28 -
UN IDsUN 1789 8/PG 3
WGK Germany2
RTECSRT3500000
FLUKA BRAND F CODES3
TSCAYes
HS Code28439090
Hazard Class8
Packing GroupIII
ToxicityMLD i.v. in rabbits: 0.0186 g/kg (Orestano)

PALLADIUM CHLORIDE(II) - Upstream Downstream Industry

Raw MaterialsPalladium
Downstream ProductsAlbuterol sulfate

PALLADIUM CHLORIDE(II) - Reference Information

Decomposition200 °C
EPA chemical substance information information provided by: ofmpeb.epa.gov (external link)
Palladium palladium is one of the platinum group elements (ruthenium, rhodium, palladium, osmium, iridium, platinum), the periodic system is a group VIII element, the element symbol Pd, the atomic number 46, and the atomic weight 106.42. Palladium was isolated from crude platinum in Wollaston, England, in 1803. The content of the crust is 1 × 10-6%, which is the most abundant platinum group element. In nature, it exists as a simple substance or alloy, and it is symbiotic with other platinum elements, especially with platinum, such as the original platinum ore, nickel copper sulfide, nickel pyrite, Palladium containing chalcopyrite and so on. Palladium is produced industrially from platinum ores or as a by-product of refining copper and nickel ores. Palladium is a silver-white metal. Melting point 1554 ° C, boiling point 2970 ° C, density 12.02g/cm 3. Soft texture, good ductility and plasticity. Bulk palladium can absorb large amounts of hydrogen. The hydrogen absorption capacity of sponge-like or colloidal palladium is stronger. At room temperature, 1 volume of sponge Palladium absorbs 900 volume of hydrogen. When heated to 40~50 °c, most of the hydrogen is released, and all of the hydrogen is released at high temperature.
Palladium is a kind of catalyst with excellent catalytic performance. The applicable reaction types include hydrogenation, isomerization, disproportionation, dehydrogenation and oxidation, in petrochemical applications even more than platinum catalyst. Palladium Catalysts are also used for the treatment of toxic waste gases emitted from nitric acid plants. Palladium and its alloys can be used instead of platinum for jewelry, for example, alloys made with smaller amounts of palladium and gold are the best "Platinum". Palladium dichloride can be obtained by reacting Palladium with chlorine or aqua regia. Palladium dichloride can be used as a catalyst for Olefin oxidation, and also used in medicine, electroplating, photography, detection of trace carbon monoxide and preparation of other catalysts.
This information was edited by chemical book Xiaonan (2015-09-18).
Noble metal catalyst Noble metal catalyst refers to a noble metal material that can change the rate of a chemical reaction without itself participating in the final product of the reaction. In 1831, the British Phillips (philips) proposed to produce sulfuric acid by the contact method of platinum as catalyst, and the method was industrialized in 1875, which is the earliest industrial application of noble metal catalysts. Almost all noble metals can be used as catalysts, but platinum, palladium, rhodium, silver, ruthenium and the like are commonly used, among which platinum and rhodium are the most widely used. According to the category of catalytic reaction, noble metal catalysts can be divided into two categories: homogeneous catalysis and heterogeneous catalysis. Catalysts for homogeneous catalysis are generally soluble compounds (salts or complexes), such as palladium chloride, Rhodium chloride, Palladium acetate, rhodium carbonyl, Rhodium triphenylphosphine carbonyl, and the like. The catalyst for heterogeneous catalysis is an insoluble solid, and its main morphology is a metal wire mesh state and a porous inorganic support supported metal state. Metal wire mesh catalyst (such as platinum mesh, silver mesh) the scope of application and the amount of limited. The vast majority of heterogeneous catalysts are supported on noble metals, such as Pt/Al2O3, Pd/C, Ag/Al2O3, Rh/process, and the heterogeneous catalytic reaction accounts for 80% ~ 90%.
1. Diphenyl carbonate can be prepared by reacting phenol with carbon monoxide in the presence of triethylamine in the presence of palladium chloride as catalyst.
2, using isobutylene as raw material, copper chloride-palladium chloride as catalyst, potassium chloride as co-catalyst, decane and water two-phase diluent for oxidation and molecular rearrangement, Can be prepared from methyl ethyl ketone products. The by-product, tert-butyl alcohol, is converted to isobutylene by catalytic dehydration.
3, with the development of petrochemical industry, using ethylene as raw material, oxygen is directly oxidized to synthesize acetaldehyde in one step through hydrochloric acid aqueous solution catalyst containing palladium chloride and copper chloride.
4, 2-methylfuran as raw material, in aqueous solution, palladium chloride as catalyst, at a pressure of 0.25MPa heated to 30 ℃, hydrogenation, ring opening, can produce 3-acetyl N-propanol crude. Then vacuum distillation refining, can be prepared fine.
Application for the preparation of special catalysts, molecular sieves; Preparation of non-conductor material coating; Production of gas sensors.
used as analytical reagent
It is mainly used in the manufacture of special product catalysts, molecular sieves, and the preparation of surfactants for the coating of non-conductor materials, production of gas sensitive element, etc.
It is mainly used as a catalyst for the production of acetaldehyde from ethylene and other palladium-based catalysts. Preparation of molecular sieve, preparation of non-conductor material plating surface activator. For the manufacture of gas-sensitive components.
determination of palladium, Mercury, thallium and iodine, purification of rare gases, palladium chloride test paper to test carbon monoxide, Cobalt; Catalyst, terminal olefin (α-olefin) to form methyl ketone oxidation catalysis; the oxidation of alkenes to aldehydes in aqueous solution using air as an oxidant by The Waker reaction is used to synthesize semiconducting metal-containing polymers with a polypyrrole skeleton that is minimal in energy and close to planar.
for ICP-AES, AAS, AFS, ICP-MS, ion chromatography, etc. Standard solutions were used for titration analysis.
production method Palladium powder is added to a reactor containing hydrochloric acid, and air is introduced for oxidation reaction under stirring, the palladium chloride solution is generated, and the solution is purified, filtered, evaporated and concentrated, cooled and crystallized, centrifuged and dried to obtain a finished palladium chloride product. Pd 2HCl 0.5O2 → PdC12 H2O
toxic substance data information provided by: pubchem.ncbi.nlm.nih.gov (external link)
Last Update:2024-04-09 20:52:54
PALLADIUM CHLORIDE(II)
Supplier List
Shanghai Macklin Biochemical Co., Ltd
Featured ProductsSpot supply
Product Name: Palladium chloride Visit Supplier Webpage Request for quotation
CAS: 7647-10-1
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328 Click to send a QQ message
WhatsApp: +86-18821248368
SHANGHAI ACMEC BIOCHEMICAL TECHNOLOGY CO., LTD.
Featured ProductsSpot supply
Product Name: Palladium (II) Chloride Visit Supplier Webpage Request for quotation
CAS: 7647-10-1
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922 Click to send a QQ message
Wechat: 18621343501
WhatsApp: +86-18621343501
JIANGSU BSECHEM CHEMICAL TECHNOLOGY CO., LTD.
Spot supply
Product Name: Palladium(II) chloride Request for quotation
CAS: 7647-10-1
Tel: +86-17505207175
Email: r@reformchem.com
Mobile: +86-17505207175
QQ: 3787852685 Click to send a QQ messageSend QQ message
Wechat: chemical6666
Nantong Reform Petro-Chemical CO., LTD.
Spot supply
Product Name: Palladium(II) chloride Request for quotation
CAS: 7647-10-1
Tel: +86-17551318830
Email: r@reformchem.com­
Mobile: +86-17551318830
QQ: 3785839865 Click to send a QQ messageSend QQ message
Wechat: chemical6666 
Guangzhou Yuanda New Material Co.,Ltd
Product Name: Palladium chloride Request for quotation
CAS: 7647-10-1
Tel: +86 19849939632
Email: 2470479589@qq.com
Mobile: +86 19849939632
QQ: 2470479589 Click to send a QQ message
Wuhan Xingzhongcheng Chemical limited company
Spot supply
Product Name: Palladium(II) chloride Request for quotation
CAS: 7647-10-1
Tel: 86+027-83389957
Email: 1024042217@qq.com
Mobile: 86+18627766980
QQ: 1024042217 Click to send a QQ message
Hefei TNJ Chemical Industry Co.,Ltd.
Product Name: Palladium(II) chloride Request for quotation
CAS: 7647-10-1
Tel: 0086-551-65418684
Email: sales@tnjchem.com
     info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840 Click to send a QQ message
Wechat: 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
Shanghai Jiuyue Chemcial Co.Ltd
Product Name: Palladium Chloride Request for quotation
CAS: 7647-10-1
Tel: 021-50753020
Email: service@chembk.com
Mobile: 15902139461
QQ: 1760334313 Click to send a QQ messageSend QQ message
Shanghai Macklin Biochemical Co., Ltd
Featured ProductsSpot supply
Product Name: Palladium chloride Visit Supplier Webpage Request for quotation
CAS: 7647-10-1
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328 Click to send a QQ message
WhatsApp: +86-18821248368
SHANGHAI ACMEC BIOCHEMICAL TECHNOLOGY CO., LTD.
Featured ProductsSpot supply
Product Name: Palladium (II) Chloride Visit Supplier Webpage Request for quotation
CAS: 7647-10-1
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922 Click to send a QQ message
Wechat: 18621343501
WhatsApp: +86-18621343501
JIANGSU BSECHEM CHEMICAL TECHNOLOGY CO., LTD.
Spot supply
Product Name: Palladium(II) chloride Request for quotation
CAS: 7647-10-1
Tel: +86-17505207175
Email: r@reformchem.com
Mobile: +86-17505207175
QQ: 3787852685 Click to send a QQ messageSend QQ message
Wechat: chemical6666
Nantong Reform Petro-Chemical CO., LTD.
Spot supply
Product Name: Palladium(II) chloride Request for quotation
CAS: 7647-10-1
Tel: +86-17551318830
Email: r@reformchem.com­
Mobile: +86-17551318830
QQ: 3785839865 Click to send a QQ messageSend QQ message
Wechat: chemical6666 
Guangzhou Yuanda New Material Co.,Ltd
Product Name: Palladium chloride Request for quotation
CAS: 7647-10-1
Tel: +86 19849939632
Email: 2470479589@qq.com
Mobile: +86 19849939632
QQ: 2470479589 Click to send a QQ message
Wuhan Xingzhongcheng Chemical limited company
Spot supply
Product Name: Palladium(II) chloride Request for quotation
CAS: 7647-10-1
Tel: 86+027-83389957
Email: 1024042217@qq.com
Mobile: 86+18627766980
QQ: 1024042217 Click to send a QQ message
Hefei TNJ Chemical Industry Co.,Ltd.
Product Name: Palladium(II) chloride Request for quotation
CAS: 7647-10-1
Tel: 0086-551-65418684
Email: sales@tnjchem.com
     info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840 Click to send a QQ message
Wechat: 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
Shanghai Jiuyue Chemcial Co.Ltd
Product Name: Palladium Chloride Request for quotation
CAS: 7647-10-1
Tel: 021-50753020
Email: service@chembk.com
Mobile: 15902139461
QQ: 1760334313 Click to send a QQ messageSend QQ message
View History
PALLADIUM CHLORIDE(II)
苯甲醛,4-乙氧基-3-甲氧基-
兰前列酮
3,6-二氯-9-[(环氧乙烷-2-基)甲基]-9h-咔唑
2-氯-4-异丙基苯硼酸
Basic lead acetate test solution(ChP)
2-[[(3-氯-2-甲基苯基)氨基]甲基]异吲哚啉-1,3-二酮
Β-羟基-Β-甲基丁酸精氨酸
(1R,3R,4R,7S)-1-((双(4-甲氧基苯基)(苯基)甲氧基)甲基)-3-(5-甲基-2,4-二氧代-3,4-二氢嘧啶-1(2H)-基)-2,5-二氧杂双环[2.2.1]庚烷-7-基 (2-氰乙基) 二异丙基亚磷酰胺
舒拉明钠
Raw Materials for PALLADIUM CHLORIDE(II)
Palladium
Downstream Products for PALLADIUM CHLORIDE(II)
Albuterol sulfate
  • Home
  • Product Category

© 2015, 2023 ChemBK.com All Rights Reserved | Build: 20230617001